- Home
- Blog
- . So, I decided to look into diplexers. After researching and comparing different options, I settled on the Mark Schoonover - HF/VHF Diplexer. It allows me to run both HF and VHF antennas simultaneously without causing interference, and it has worked flawlessly for me on the 6-meter band. Overall, I highly recommend this diplexer for any amateur looking to activate multiple bands without the hassle of constantly switching coax lines.
. So, I decided to look into diplexers. After researching and comparing different options, I settled on the Mark Schoonover - HF/VHF Diplexer. It allows me to run both HF and VHF antennas simultaneously without causing interference, and it has worked flawlessly for me on the 6-meter band. Overall, I highly recommend this diplexer for any amateur looking to activate multiple bands without the hassle of constantly switching coax lines.
By:Admin
That's when I stumbled upon the HF/VHF diplexer. Essentially, this device allows for the combination of two different frequency bands onto a single transmission line. In my case, it would allow me to combine both the HF and VHF frequencies onto one coax cable, thus eliminating the need for a coax switch.
After doing some research, I decided to purchase the Mark Schoonover HF/VHF diplexer. This diplexer has a frequency range of 1.8 to 54 MHz and 76 to 154 MHz, which covers all of the bands I would be using with my IC-7000.
Installation was relatively straightforward. I attached the diplexer to the back of my rig with coax cables connecting to both the HF and VHF ports. From there, I ran a single coax cable from the "Combiner" port on the diplexer to my antenna.
I tested the diplexer with both HF and VHF frequencies, and I was pleased to find that it worked flawlessly. I was able to switch between bands without any issues, and my IC-7000 didn't even notice the difference.
Overall, the Mark Schoonover HF/VHF diplexer is a fantastic solution for anyone who wants to combine multiple frequency bands onto a single transmission line. It's easy to install, works great, and eliminates the need for a coax switch. If you're looking to activate the 6-meter band with your do-it-all rig, I highly recommend giving this diplexer a try.
Company News & Blog
Global Import and Export of Fiber Optic Splitters: Catalog Featuring Various Types of Optical Equipment
, Fiber Optic Splitter, International Trade, ECVVFiber Optic Splitter - An Essential Component in Modern Communication NetworksFiber optic splitter is a significant component in the communication network. It distributes the optical signals from one fiber optic cable to multiple fibers, thereby enabling the same signal to be transmitted to multiple destinations simultaneously. This makes it indispensable in situations where there is a high demand for data transfer, such as in data centers, cloud computing, and high-speed internet networks.China, the USA, the UK, Australia, India, Pakistan, Germany, and many other countries are involved in the import and export of fiber optic splitters. ECVV, a reliable platform for international trade, offers a catalog of fiber optic splitter products from these countries. Let us delve deeper into the features and benefits of fiber optic splitters.Types of Fiber Optic SplittersThere are two types of fiber optic splitters: Fused Biconic Taper (FBT) splitters and Planar Lightwave Circuit (PLC) splitters.FBT splitters use heat to fuse two or more fibers together, which form a taper that can split the signals. FBT splitters are cost-effective and widely used in the telecom industry.PLC splitters use a photolithographic process to create a glass substrate with waveguides that divide the signals. PLC splitters are more reliable, have better performance, and are smaller in size than their FBT counterparts.Applications of Fiber Optic SplittersFiber optic splitters are used in many applications, including:1. FTTH (Fiber-to-the-home)Splitting the signal to multiple households from a single fiber optic cable can be accomplished using fiber optic splitters. This makes it possible to provide internet, TV, and phone services to multiple customers using a single fiber optic cable.2. Data CentersFiber optic splitters are used to distribute the signal from a single source to multiple destinations in a data center. This can help to save space and reduce cable clutter, leading to improved efficiency and cost-effectiveness.3. Security and Surveillance SystemsFiber optic splitters are also used in security and surveillance systems. They help to distribute the signal from cameras to multiple monitoring stations, thereby enabling improved security in a building or facility.Advantages of Fiber Optic Splitters1. Increased EfficiencyFiber optic splitters make communication networks more efficient by allowing multiple signals to be transmitted simultaneously, resulting in faster transfer of data.2. Reduced CostsUsing fiber optic splitters can reduce installation and maintenance costs by reducing the number of fibers needed to transmit signals. This can be especially beneficial in large-scale projects or data centers.3. Improved Signal QualityFiber optic splitters have minimal signal loss and distortion, leading to improved signal quality. This makes them ideal for high-speed data transfer and communication networks.ConclusionFiber optic splitters are an essential component in modern communication networks. They enable the distribution of optical signals from a single cable to multiple destinations, making communication more efficient and reducing costs. China, the USA, the UK, Australia, India, Pakistan, Germany, and many other countries are involved in the production and trade of fiber optic splitters. ECVV is a reliable platform for international trade and offers a wide range of fiber optic splitter products. With the increasing demand for high-speed data transfer and communication networks, fiber optic splitters are becoming an increasingly important technology.
8 to 1 Line Data Selector Multiplexer with THT Mounting and DIP16 Case
and 74HC151N.Looking for a high-quality and reliable 8 to 1 line data selector multiplexer? Look no further than the 74HC151N! This integrated circuit is designed to allow you to select one of up to eight input lines to pass through to a single output. With the 74HC151N, you'll enjoy fast and efficient data selection, making it perfect for a wide variety of digital applications.One of the key benefits of the 74HC151N is its type of integrated circuit. This digital integrated circuit is designed specifically for use in digital applications, meaning that it provides fast, efficient, and reliable performance even in complex systems. Whether you're using it to control a robot, manage a database, or run complex simulations, the 74HC151N is sure to deliver the performance you need.In addition to its digital design, the 74HC151N is also designed with a high degree of flexibility in mind. Its 8 to 1 line data selector multiplexer design allows you to select up to eight input lines to pass through to a single output, making it perfect for a wide range of applications. Whether you need to select between different data streams or simply combine several inputs into a single output, the 74HC151N makes it easy.Of course, the key to any successful integrated circuit design is reliability. With the 74HC151N, you can rest assured that you're getting a high-quality and reliable product. Its THT mounting and DIP16 case design ensure that it stays securely in place, while its HC series (which features components specifically designed to handle high-speed data transfer) ensures that your data is transferred quickly and accurately.In short, if you're looking for a high-quality 8 to 1 line data selector multiplexer, the 74HC151N is definitely worth considering. With its digital design, flexible input selection, and reliable performance, it's a great choice for any digital application. So why wait? Start exploring the 74HC151N today and start enjoying all the benefits it has to offer!
Get Improved TV Viewing with Dual Antenna Installation Coupler/Combiner
: Maximizing TV Reception for Cord-CuttersCord-cutters have revolutionized the way we think about television. Instead of relying on cable or satellite providers to access programming, these savvy consumers have discovered the joy of streaming services. According to a recent survey by the National Research Group, 67% of cord-cutters are more satisfied with their TV experience compared to when they had cable. However, to truly optimize your cord-cutting setup, you need a reliable TV antenna setup.Fortunately, installing two TV antennas can significantly improve reception quality and access to local programming. But how do you combine signals from two antennas without creating interference or compromising performance? Enter the Winegard 2-Way Dual TV Antenna Coupler Combiner (CC-7870).With this innovative coupler/combiner, you can connect two TV antennas to receive a wider range of channels and minimize signal interference. Here's how it works:- First, select two high-quality TV antennas with strong reception capabilities. Ideally, you'll want to choose antennas with a similar gain and operating frequency to ensure compatibility.- Install the antennas in two different locations to maximize coverage. For example, you could place one antenna in the attic and another on the roof, or one on the east side of your home and one on the west.- Connect each antenna to the Winegard coupler/combiner using standard coaxial cables. The coupler/combiner should have two inputs and one output.- Position the coupler/combiner near your TV or digital converter box. Make sure the output is connected to your TV or converter box with a coaxial cable.- Scan for channels using your TV or converter box. You should now have access to a wider range of channels, including local programming that was previously out of reach.The Winegard 2-Way Dual TV Antenna Coupler Combiner (CC-7870) is a game-changer for cord-cutters who want the best possible TV experience. With this simple device, you can improve reception quality, increase channel options, and reduce signal interference. Plus, it's easy to install and use, even if you're not a tech expert.But don't just take our word for it. Try the Winegard coupler/combiner for yourself and see how much it can enhance your cord-cutting setup. Shop now at Solid Signal, where we have a wide range of TV antennas and accessories to meet your needs. Remember, with the right equipment, you can cut the cord and enjoy your favorite shows without sacrificing quality or convenience.
Buy Quality Car Starter Motors & Bushes with Rapid Delivery at Demon Tweeks!
Demon Tweeks Purchases New Starter Motors to Boost Its Motorsport Retail BusinessDemon Tweeks has recently announced the acquisition of a new range of starter motor products to enhance its motorsport business offerings. The UK's biggest motorsport retailer, Demon Tweeks, has bought several new starter motors to add to its already extensive inventory of high-quality and reliable racing car components. Roy Williamson, a spokesperson for the company, said that buying the new range of starter motors from Tilton will help the company continue to provide high-quality motor racing components to its customers.Demon Tweeks is a well-known brand in the motor racing world that has been providing motorsport enthusiasts and professionals with top-notch equipment and components for several years. Founded in 1971, the company has since become the UK's number one retailer of motorsport products, attracting a loyal customer base that includes racers, hobbyists, and enthusiasts.The acquisition of the new range of starter motors from Tilton is a further indication of Demon Tweeks' commitment to providing its customers with the most advanced and efficient motorsport products. Demon Tweeks is dedicated to sourcing the best products from the leading brands in the industry, and the addition of the new range of starter motors from Tilton reinforces this commitment."We are pleased to announce the acquisition of the new range of starter motors from Tilton," said Roy Williamson, the spokesperson for Demon Tweeks. "This development is a further indication of our commitment to providing our customers with the best motorsport products on the market. We are dedicated to sourcing the best products from the industry's leading brands, and the new range of starter motors from Tilton is a testament to our commitment."The Tilton starter motors purchased by Demon Tweeks are of the highest quality, with proven reliability, speed, and durability. As one of the most trusted names in motorsport, Tilton has built a reputation for delivering high-quality components that stand the test of time. With the inclusion of Tilton's renowned starter motors, Demon Tweeks will be able to cater to a wider range of customers, including those who need high-performance starter motors that can deliver consistent performance in extreme conditions.The new range of starter motors is now available for purchase at Demon Tweeks, with worldwide delivery options that ensure fast and reliable delivery to customers worldwide. Motor racing enthusiasts and professionals can purchase the products online or at the company's retail stores located in Wrexham and London.Demon Tweeks' commitment to providing its customers with the best motorsport products extends beyond its offerings. The company also provides its customers with excellent customer service and technical support, ensuring that they receive the necessary assistance and advice they need to make informed decisions when purchasing products. Customers can rely on the company's team of experienced professionals to help them with everything from choosing the right products to installation and maintenance. The company's extensive range of motorsport products and services makes it a one-stop-shop for all motorsport enthusiasts and professionals.In conclusion, the acquisition of the new range of starter motors from Tilton is a further indication of Demon Tweeks' commitment to providing its customers with the best motorsport products on the market. The new range of starter motors is of the highest quality and is backed by the company's excellent customer service and technical support. Motor racing enthusiasts and professionals can now purchase these products online or at the company's retail stores, with worldwide delivery options that ensure fast and reliable delivery. Demon Tweeks continues to set the standard for motorsport retail, and the new range of starter motors from Tilton is a testament to this commitment.
Optimizing ADS-B Flight Tracking with Cavity Filters: A Step-by-Step Guide
Cavity filters are an important component in UHF (Ultra High Frequency) radio systems. They are used to eliminate unwanted frequencies and ensure that the desired signal is received by the receiver. The principle of operation of a cavity filter is that it uses a resonator to create a specific frequency bandwidth that prevents unwanted signals from entering the receiver.In the realm of aviation, cavity filters play a crucial role in ADS-B (Automatic Dependent Surveillance-Broadcast) flight tracking systems. ADS-B is a technology that allows aircraft to transmit data about their position, speed, and altitude to ground stations and other aircraft equipped with ADS-B receivers. This data is then used to improve air traffic control and enhance flight safety.FlightAware is a company that provides ADS-B tracking services and related equipment, and they recommend the use of cavity filters as part of their installation process for ADS-B receivers. In particular, they recommend the use of 1090 cavity filters for those who are using UHF frequencies to receive ADS-B signals.The importance of using a cavity filter in an ADS-B system cannot be overstated. Without a cavity filter, the receiver may pick up unwanted signals from other nearby radio transmitters, which can cause interference and degrade the quality of the ADS-B data. A cavity filter acts as a barrier, preventing unwanted frequencies from entering the receiver and ensuring that only the desired ADS-B signals are received.When setting up an ADS-B system, proper placement of the cavity filter is important. The recommended order of connection from the Pi4 (a type of single-board computer commonly used in ADS-B systems) is as follows: Airspy R2 (an ADS-B receiver), cavity filter, uptronics preamp (which boosts the ADS-B signal for better reception), and antenna. This order ensures that the cavity filter is placed between the receiver and the preamp, so that it can effectively block unwanted signals before they reach the preamp.Overall, the use of a cavity filter is an essential component in any UHF radio system, especially in ADS-B flight tracking systems. By properly placing a cavity filter in an ADS-B system, users can ensure that they receive accurate and reliable flight data that can help improve flight safety and air traffic control.
Compact Diplexer for Navigation Systems Supporting Multiple Bands
What is a Diplexer for GNSS L1, L2?A Diplexer is an electronic component that allows the transmission of two different frequency bands on a single coaxial cable. In GNSS (Global Navigation Satellite System) applications, a Diplexer for GNSS L1, L2 is used for combining or separating the two different frequency bands. The Taoglas DXP.01.A Diplexer is a compact SAW (Surface Acoustic Wave) Diplexer that can be used in any navigation system application that uses the GPS/GALILEO L1, GLONASS L2, and BeiDou B2 bands.Why use a Diplexer for GNSS L1, L2?GNSS receivers use two different frequency bands, L1, and L2. L1 is used for satellite positioning, while L2 is used for satellite signal correction. The use of two frequency bands improves the accuracy and reliability of the GNSS system. A Diplexer for GNSS L1, L2 allows receivers to use both frequencies simultaneously, thus improving the receiver's capability to track satellite signals.Advantages of the Taoglas DXP.01.A DiplexerThe Taoglas DXP.01.A is a compact diplexer that offers several advantages:1. High-Quality Signal Filtering: The Diplexer uses SAW technology that provides improved signal filtering, resulting in high-quality signal reception.2. Wide Frequency Range: The Diplexer supports a wide frequency range, making it suitable for use with different navigational systems that use GPS/GALILEO L1, GLONASS L2, and BeiDou B2 bands.3. Compact Size: The Diplexer is compact, which makes it easy to integrate into existing navigation systems and reduces the system's overall size.4. Easy to Install: The Diplexer is easy to install, and the manufacturer provides detailed installation instructions.Diplexer For SaleIf you are in the market for a Diplexer for GNSS L1, L2, the Taoglas DXP.01.A is an excellent choice. It offers high-quality signal filtering, a wide frequency range, a compact size, and is easy to install. You can find Diplexers for sale at various online stores or through electronics suppliers. It is important to choose a reliable supplier to ensure you get a genuine product that meets your needs. In conclusion, a Diplexer for GNSS L1, L2 is a necessary component for any navigation system that uses the GPS/GALILEO L1, GLONASS L2, and BeiDou B2 bands. The Taoglas DXP.01.A Diplexer offers high-quality signal filtering, a wide frequency range, a compact size, and is easy to install. It is an excellent choice for anyone in the market for a Diplexer for sale.
High-Quality Cavity Duplexer Passive Diplexers from China Manufacturers
Frequency, Passive Duplexer, Cavity Filter, RF Filters, Communication Industry, Wireless TechnologyThe Communication Industry has come a long way since the days of the telegraph and telephone, and now even more so with the onset of wireless technology. The use of wireless communication in the present era has become such an integral part of our lives that it is hard to imagine life without it. From cell phones to Wi-Fi networks, wireless technology is used everywhere; however, the functioning of these networks is based on different technologies, methods, and hardware that come together to make this possible. One such vital component is the Duplexer.Duplexer- What is it?A Duplexer or Passive Duplexer, is a device that enables bi-directional communication by allowing two different frequency bands to share the same physical antenna without interfering with each other's signal. In the world of radio communication, Duplexers are crucial to make the most of a limited bandwidth since it helps prevent the back and forth oscillation of signals that happen when transmitting and receiving signals simultaneously by using different frequencies. How does it work? In terms of functionality, Duplexers are relatively simple devices. The basic idea is to isolate the transmit and receive signals using a Cavity Filter, which is a critical element in the signal separation process. The Cavity Filter uses an electromagnetic pocket or a cavity created within the device to allow only the desired frequency to pass through, while other frequencies are blocked. This filter is essential because isolating the transmit and receive signals prevents the transmitter's power from getting reflected back to the receiver, thus keeping the signal clean and strong. Applications of DuplexersDuplexers are ubiquitous in the communication industry as they are used in various devices, ranging from cell phones, walkie-talkies, and even base stations that cater to larger communication needs. Particular industries, like aviation, use duplexers in their radio communication channels. Wireless technology users heavily depend on these small yet critical devices, rendering them an essential part of our communication infrastructure. China's Role in Duplexer ManufacturingChina is one of the leading countries in manufacturing Duplexers, accounting for a significant portion of the world's supply. China's Duplexer manufacturers have made a significant contribution to the wireless industry by providing reliable, high-quality products. Their products cater to the needs of various communication needs, including GPS, cellular, and even broadband applications. Manufacturers from reputed businesses such as our young company have made significant investments in developing and innovating to provide top-quality Duplexers to clients worldwide. Conclusion: Duplexer technology's importance cannot be overstated as it carries the responsibility of ensuring clear and uninterrupted communication in wireless technology. The communication industry relies heavily on these small yet vital devices, and China has been a leading country in Duplexer manufacturing for years. Duplexers are incorporated in numerous communication applications, including cell phones, walkie-talkies, and base stations that cater to larger communication needs, amplifying the importance of this technology. In a world that thrives on wireless technology, the contribution of Duplexer manufacturers and its products are truly invaluable.
High-Performance Dual WideBand Frequency Synthesizer with Integrated VCO and Loop Filter for Low-Power Applications
CoreHW has released a new solution for frequency synthesizing that allows for accurate, fast, and seamless switching between two frequency bands. The CorePLL is an innovative and ultra-low power solution that is small in size and high in performance, offering a dual wideband frequency synthesizer with an integrated VCO and loop filter. This new solution offers high integration level, which is perfect for inter-band Carrier Aggregation.The CorePLL has a power consumption of only 18mA from a 1.35V power supply, making it one of the most energy-efficient solutions in the market. It offers an ultra-small form factor that allows it to be incorporated into even the smallest of designs, without compromising on performance. This solution is perfect for applications that require accurate frequency-switching and band-matching, such as wireless communications, Satcom, radar and defense applications.One of the key features of the CorePLL is its versatility. It is capable of handling multiple frequency bands, including frequencies used by multiple wireless communication standards such as 5G, LTE, Wi-Fi, and more. The integrated VCO and loop filter make it easy to produce high-quality and stable signals, while the dual PLLs allow for seamless switching between two frequency bands, improving overall performance and reliability.The CorePLL solution is backed by CoreHW, a prominent player in the RF IC solutions market. CoreHW has been known for consistently developing innovative technologies that offer high performance, low power consumption and small size. The launch of the CorePLL is yet another example of the company’s commitment to innovation and excellence.The CorePLL solution is suitable for a wide range of applications that require precise frequency control, accurate timing, and low-phase noise signals. The solution is perfect for applications where high-performance, accuracy, and ultra-low power consumption are essential, such as aerospace, defense, and automotive industries.In conclusion, CoreHW's CorePLL is a versatile and innovative frequency synthesizer solution that offers high performance, low power consumption, and small size. The solution is perfect for applications requiring accurate frequency switching and band-matching, and is suitable for a wide range of industries. With an ultra-small form factor and an integrated VCO and loop filter, the CorePLL makes it easy to produce high-quality and stable signals, providing users with a reliable and efficient solution that delivers superior performance. Backed by CoreHW, the CorePLL sets a new standard in the RF IC solutions market and is expected to make a significant impact in the industry.
Contra-Directional Switching Enabled by Silicon-Grating Phase Change Material
OSA | Contra-directional Switching Enabled by Si-GST Grating: A Revolutionary Step Forward in Optical Switching TechnologyOptical switches are essential components in modern communication networks, enabling efficient and reliable transmission of data. However, conventional optical switches suffer from some drawbacks, such as high power consumption, limited operating bandwidth, and slow switching speed. Recently, new technologies have been developed to overcome these limitations. One of these is the use of phase-change materials, such as Ge2Sb2Te5 (GST), in optical devices to achieve fast and energy-efficient switching.A research team from the State Key Laboratory of Information Photonics and Optical Communications at Beijing University of Posts and Telecommunications has published a paper in OSA's Optics Letters, presenting a new design of a grating-assisted contra-directional coupler for optical switching, using a Si-GST grating. This new design enables efficient and fast switching, with low power consumption and broad operating bandwidth.The system works by utilizing the change in the effective refractive index of GST-loaded silicon waveguide, which changes significantly when the GST is switched from the amorphous state to the crystalline state. This change in refractive index, in turn, enables a large tuning of the propagation constant, which allows for efficient switching of the optical signal. The Si-GST grating coupler uses two coupled waveguides, which are designed to satisfy the phase-match condition only at the amorphous state, to achieve Bragg reflection at the drop-port.The experimental results showed that the device insertion loss was less than 5 dB, and the extinction ratio was more than 15 dB, with an operation bandwidth of 2.2 nm around the 1576 nm operating wavelength. Furthermore, due to the nonvolatile property of the GST material, the system has no static power consumption to maintain the two states, which is a significant advantage over other conventional optical switching technologies.This Si-GST grating-assisted optical switch is the first of its kind, using phase-change material, which opens up new possibilities for the effective design and implementation of advanced optical communication networks. It could lead to highly flexible and fast optical switches with low power consumption and broad operating bandwidth, which are critical factors in modern communication systems.This research breakthrough marks a significant step forward in the field of optical communication, with possible applications ranging from optical interconnects and data-center networks to optical routers and high-capacity optical waveguide devices. Moreover, the fast-switching capability and efficient performance of this phase-change material-based optical switch could also have implications in other fields, such as micro-electronics and energy-efficient computing systems.In conclusion, the Si-GST grating-assisted contra-directional coupler for optical switching represents a novel and promising direction in modern optical communication technology. The combination of phase-change materials and grating-assisted couplers enables low-power, fast, and efficient switching, which can be crucial in the development of advanced optical networks. The next step for the research team is to optimize the system and explore its potential applications further, which could lead to numerous advances in optical communication and beyond.